Welcome to PAWIN ENGINEERING. The experts in Spray Nozzles in Thailand

Products
We provide pretreatment solutions from washing and rinsing to drying.
FullJet® Spray Nozzles
> A solid, cone-shaped spray pattern with a round impact area.
> Uniform spray distribution of medium- to large-sized drops.
> Exacting dimension ensures accurate and reliable performance.
> Excellent results in spraying applications requiring complete coverage of an area or zone.
> Available in wall mounted, angle type, removable cap & vane and one-piece body.
Spray pattern
> Cone-shaped
Spray Angle
> 15° - 125° depending on types
Capacity
> 0.38 - 19800 lpm depending on types
Materials
> Brass, mild steel, 303SS, 316SS, and PVC depending on types.
Applications
> washing and rinsing processes, cooling of coke, primary metals, and other materials, suppression of fugitive dust in the processing of bulk ores, coal, limestone, sand, and gravel, scrubbing, washing, and cooling of flue gases to remove fly ash and other products of combustion, breaking up and deaerating foam, creating and dispersing drops in chemical reaction processing and fire protection and prevention.
> Cleaning and washing of products requiring deep penetration and/or spray induced turbulence to ensure through washing, desuperheating of steam, spraying the inside of ducts and pipes for cooling or cleaning.

More details, please contact our sale division: 0-2911-4761.

KYNAR® FullJet® Spray Nozzles
> Simple maintenance.
> Location marks on vane properly position vane after cleaning.
> Ensures vane is not dislodged by vibration.
> Available in 1-1/2" and 2" NPT or BSPT female inlet connections.
> Maximum temp = 66°C and max pressure = 6 bar for 2" version.
Spray pattern
> Full cone spray pattern
Spray Angle
> 52° - 82°
Capacity
> 0.50 - 11.0 lpm
Applications
> Integrated circuit manufacturing, PCB manufacturing, washing and rinsing, cooling and rinsing, dust suppression, gas scrubbing, deaerating, and food processing.

More details, please contact our sale division: 0-2911-4761.

Polypropylene FullJet® Spray Nozzles
> Minimal maintenance.
> Location marks on vane properly position vane after cleaning.
> Ensures vane is not dislodged by vibration.
> Available in 1-1/2" and 2" NPT or BSPT female inlet connections.
> Maximum temp = 66°C and max pressure = 6 bar for 2" version.
Spray pattern
> Full cone spray pattern
Spray Angle
> 46° - 128° depending on the capacity
Capacity
> 38 - 539 lpm
Applications
> washing, rinsing, and dust control.

More details, please contact our sale division: 0-2911-4761.

Quick FullJet® Spray Nozzles
> Medium- to large-sized drops with a round impact area.
> Easy installation just turning 1/4 turn.
Spray pattern
> Cone-shaped pattern
Spray Angle
> 15° - 120° depending on types
Capacity
> 0.38 - 92 lpm.
Materials
> Brass and 303SS.
Applications
> washing and rinsing processes, cooling of primary metals and other materials, supression of fugitive dust in the processing of bulk ores, coal, limestones, sand, and gravel, fire protection, scrubbing, washing, and cooling of flue gases to remove fly ash and other products of combustion, breaking up and deaerating foam and etc.

ProMax Quick FullJet Spray Nozzles
> Color-coded by flow rate for easy identification
> Internal stop for positive spray tip alignment
> Each tip is equipped with a VITON® seal to ensure trouble-free performance.
> Optional external O-ring is available for additional contaminants.
Spray pattern
> Full-coned
Spray Angle
> 15° - 120° depending on capacity.
Capacity
> 0.38 to 92 lpm.
Applications
> Parts washing/rinising, chemical manufacturing, metal finishings, food processing, cooling, coating, printed circuit board manufacturing.
> Cleaning and washing of products requiring deep penetration and/or spray induced turbulence to ensure through washing, desuperheating of steam, spraying the insideof ducts and pipes for cooling or cleaning.
> Cooling and quenching, product washing, air and gas washers, scrubbers, liquor washers, dust control and fire protection.

For more information, please contact our sale division: 0-2911-4761.

UniJet® Spray Nozzles
> Provide a solid, cone-shaped spray pattern with a round impact area.
> Medium- to large-sized drops across their entire spray area
> Rantangular and square area are available.
Spray pattern
> Full-cone spray pattern.
Spray Angle
> 19° - 120°.
Capacity
> 0.30 to 34 lpm.
Materials
> Brass and 303SS.
Applications
> washing and rinsing processes, cooling of primary metals and other materials, suppression of fugitive dust in the processing of bulk ores, coal, limestone, sand, and gravel, scrubbing, washing, and cooling of flue gases to remove fly ash and other products of combustion, breaking up and deaerating foam, and creating and dispersing drops in chemical reaction processing.
For more information, please see our literature or contact our sales division: 0-2911-4761

SpiralJet® Spray Nozzles
> Extra Large Free Passage - minimal clogging.
> The compact size can be installed or retrofitted on most pipe systems.
Spray pattern
> Full-coned spray pattern.
Spray Angle
> 60° to 170°
Capacity
> 2.6 to 11960 lpm depending on models.
Materials
> Brass, PP, PVC, TEF for bar stock and SS for cast.
Applications
> Flue gas scrubbing, gas cooling, washing and rinsing processes, fire suppression and prevention, aerating and chemical processing.

DistriboJet® Spray Nozzles
> Utilize an internal vane - case as part of the nozzle
> Extra-large flow passages and a large open orifice to assure non-clogging operation.
> Allows an operating range of 0.7 bar to 4 bar with a full cone spray pattern delevoping at 0.7 bar.
> 50° and 65° have designed for accurate flow rates and spray angle control with their narrow sprays.
Spray pattern
> Full-coned
Spray Angle
> 50°/ 65°/ 80°/ 95°
Capacity
> 1.5 to 64 lpm
Materials
> Hardened stainless steel
Applications
> Deluging or flooding with large volumes of liquid, quenching and cooling, fire protection, deaerating, and chemical processing.